CALL US
860-456-7744
860-456-7744
Tru-Glider Pendulum floating stand alone tonearm. Avg time to set up is about 2 hours to achieve crystal clear soundstage.✅ No cables to buy✅ No holes to drill✅ No bearings✅ No Unipivot✅ No Azimuth✅ No Antiskate✅ No Friction✅ No Setup Man✅ No expensive Protractor to buy✅ Zero Offset✅ Swingheadshell included✅ Special Tru-Lift included✅ Arm Tested for 4 hours - pre pcking✅ Terminated Direct Cardas wires✅ easy to follow video instructions✅ Live help on standby✅ Transportable to another table✅ Customized height✅ Sound Dynamics
A Tonearm without bearing friction?
A Tonearm without a Uni-Pivot? Impossible!
You can never have an arm without friction! So You might think...
Up until now!
Introducing The TRU-GLIDER a revolutionary Tonearm that will offer superior sound reproduction but with Zero friction points. Our innovative design incorporate a straight zero offset with pendulum suspension meaning the arm is virtually weightless.
TRU-GLIDER Pendulum tonearm is suspended at a Single point by means of a very fine polyethylene, Dacron Monofilament.
It doesn't rest on the pivot point.
There's just enough clearance to control the arm movement.
TRU-GLIDER is friction free and is made from the highest quality materials. It’s unique styling and operation speaks for itself. Built-in Tru-lift is also used as the que device with a longer rail.
TRU-GLIDER is a straight tonearm and therefore doesn't need anti-skate. It works along the same principal as a Linear tracking tonearm but without friction or mounting.
Customized Arm length (10, 11, 12 & 14) & Height specific for your turntable.
2 measurements are required for both OFF BOARD & ON BOARD models.
A. Height from placement board or plinth to the top of the platter.
B. Mounting distance from center spindle
Picture of your table should be included.
*MSRP $4000-$6000 USD (determined by your TT needs)
ANY QUESTIONS ABOUT TRU-GLIDER? EMAIL: trulift@yahoo.ca 519-204-0195