CALL US
860-456-7744

Kronos Pro LTD Turntable by Kronos Audio

Analog excellence that surpasses the best at a fraction of the cost.

 

All turntables currently on the market are constructed either with or without a suspension system. Suspended turntables are better isolated from both mechanical and sound vibrations emitted from the speakers. these turntables are often preferred to rigid ones as they deliver a more organic sound and a softer presentation. However, the suspended platter and tone arm present a significant downside – a pronounced blurring of the musical signal. this is caused by torsional forces, a natural tendency of the sub-platter frame to rotate in sync with the platter. Although this rotation is controlled by springs, or other elastic parts found in the suspension, at this new point of equilibrium, the slightest vibration coming from the stylus reading the groove is echoed back to the stylus, out of phase. the result: the stereo image produced is blurred and distorted. Critical musical information is permanently lost. To solve the problem of torsional forces, some manufacturers build a rigid turntable and completely eliminate the suspension. But vibrations produced naturally by mechanical components and the environment are fed back to the platter and tone arm, causing yet another type of blurring and distortion of the music signal. The resulting sound is often described as harsh, aggressive and glassy. While endless research into alternate materials has been beneficial in improving the sound of rigid turntables, because the platter and the tone arm are not isolated, vibrations can only be controlled, not eliminated. Additionally, the proposed design solutions create expensive, heavy and complicated turntables.
KRONOS is an innovative turntable that breaks the rules of conventional audio design, earning the reputation of being the first of its kind. It employs two identical high mass platters, one above the other rotating in opposite directions and moving at precisely the same speed. This engineering completely eliminates torsional forces. Since the turntable is protected from mechanical and environmental vibrations, it can therefore be suspended without any negative outcomes. Finally, the judicious use of materials helps minimize the transfer of remaining mechanical vibrations emitted from the bearings and stylus friction. The result is a turntable platform with unparalleled stability. A solution so innovative that two separate patents applications are presently pending with more to come.
KRONOS uses two high quality Swiss-made DC motors that consistently deliver quiet, smooth, linear power to the platters. DC voltage to the motors is produced from a fully regulated CLASS A dual power supply, CPU-controlled to maintain constant speed. The KRONOS' controller does not use pulse width modulation, as this method of control produces jerkiness in the drives. Instead, the CPU controller receives speed readings from the platters via optical sensors and adjusts voltage to each DC motor in real time. Speed stability is therefore guaranteed over the life of the turntable, regardless of environmental factors, belt stretching or mechanical wear
When designing and building the two bearings of KRONOS, our objective was to provide the most quiet operation possible while maximizing service life. Our in-depth design process included extensive research of base metal alloys and vapour deposit coatings within the aerospace industry. We also inverted the bearing design to place contact in the rotational plane, successfully reducing torque induced drag. We also included double hydraulic insulation to provide the ideal dampening properties. The result - The lowest noise floor we have yet encountered in an audio turntable.
Every single component of the KRONOS is engineered for simplicity and ease of use: the uncomplicated construction enables easy set-up, smooth operation and long-term reliability. This straightforward design allows the focus to remain on superior sound delivery

 

Click on an image to open up the Gallery Slideshow

Priced at $42,000.00

Request More Info

SPECS

imensions: 22w x 14d x 11h inch (56w x 36d x 28h cm)
Weight: 90 lbs. (41 kg.)

Crate dimensions: 25w x 17d x 15h inch (64w x 43d x 38h cm)
Weight: 120 lbs (55 kg)
Rotational speed: 33.3 rpm and 45 rpm

Power supply: dual channel pure class A linear DC
AC voltage input: 110v or 220v factory set
DC voltage output: 0 to 5 volt, dual cpu controlled, factory calibrated
DC transmission: pico 3 pin cable
Data input/output bus: RS232
Transmission: pico 4 pin cable
Motors: 2432 precious brushes dc motors (qty 2)
Motor mounts: delrin enclosure , height adjustable

Speed guidance system: continuous open loop feedback
Sensors type: optical diode I/O (each platter)
Correction cycle: every two rotations. 1.5% max. 0.05% min.
Monitoring: twin real time speed led display
Command input type: 1 capacitance sensor on/off (left)
Command input type: 1 capacitance sensor 33/45 (right)

Platters type: composite layers and encapsulated, balanced
Platter weight: 30 lbs / platter
Drive: 3 silicone / viton 1.8 sting belts / platter
Compensation pulley: Teflon and Chrome steel bearing
Lubricant: synthetic grease
Sevice interval: 1 year (clean and re-grease)

Main bearings: dual hydraulic isolated inverted sleeve and ball
Shaft type: grounded heat hardened tool steel pvd coated
Ball type: ceramic top platter, steel lower platter
Lubricant: 8 ml. variable viscosity synthetic oil
Service interval: 5 years (clean and re-oil)

Suspension: full floating top suspended
Elastomers: 317 o-rings , viton / silicone mix
Service life: lifetime

 

Request More Information

x